Shall provide at least three years parts and labor warranty. Shall provide LED indicators located on the front panel for power, link status, and host status. Wall or furniture mountable with optional mounting kits. Rack mountable with optional rack shelf or rack mounting brackets. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel. 
Shall provide a recessed button located on the front panel to pair a transmitter to a receiver. Shall provide connection for RS-232 configuration of the transmitter on one 2.5 mm tip, ring, sleeve connector located on the front panel. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel. Shall provide the capability to configure the unit with peripheral emulation disabled. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer. Shall provide connection for the host computer on one USB Type B connector located on the rear panel. Shall support data transfer rates up to 480 Mbps Shall support USB 3.0 peripherals that can operate at USB 2.0 rates Shall support USB 2.0, 1.1, or 1.0 peripherals Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network. 
Shall support up to four receivers via an IP network using a Gigabit Ethernet switch.Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network.Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable.Twisted pair transmitter for USB peripherals.Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
0 kommentar(er)
